5.7 RTP GLASS 5.7" Touch Panel

●5.7" RTP Touch (Glass)
●Structure：F/G
●Touch IC：EETI
●Transparency：80%
●Surface Hardness：3H
●FPC Type：COB
●Interface：USB
●Touch with Glove Available
●Optional Bonding Service(Air Bonding / OCR Bonding)

The Resistive touch panel is generally classified into 4-wire, 5-wire, and 8-wire type.
A panel construction consists of two separate layers –transparency conductive ITO film layer and ITO glass layer.
One layer carries the X electrodes and the other carries the Y electrodes. Both electrodes are bonded facing each other and are held separated by dot spacers to isolate electrical contact when not pressed.
A touch (applied pressure) will bring the two layers together to create voltage variation to be detected by the controller and the contact point will then be calculated. Resistive touch panel is a lowest cost touch technology and can be easily assembled. It has become widely used in the touch screen market.

We use stable ICs and bonding equipment to maintain high yield and quality.
Touch function requires professional calibration to avoid the interference of the motherboard,
driver board and other electrical appliances to achieve the best experience.
We have professional knowledge, technology and clean room to bring customers high reliability products!

●5-Wire Resistive Touch, Technologically mature, and can be used with gloves in harsh environments.

●EETI IC offers top notch reliability, precision, and robustness

●Class 1,000 Clean. Fast Delivery. High Quality. (Air Bonding / OCR Bonding)

Front view

Front view 2D Drawing

Front view

Front view 2D Drawing